Earth Devourer (Mega Mine)

A high throughput Mine setup for 10 minable products (12 including dirt and rock)

Ever wanted a mega mine to delete that piece of island you have been neglecting ,because there were too many products !?

• The Earth Devourer has a high thoughput for product using 2 belts for each product.
• Dirt and rock are handled with a bus system with ballencers to make sure nothing gets stuck.
• Storages are easily extendable.
• Each storage and devourer(ore sorter🤣) has marking indicating from which devourer and which port the product will come from.So you can easily assign products to your desired storage.
• You can also use less then 5 devourers if you dont need them. Delete the devourer and their corresponding 2 storages. For example -1(included in blueprint, last image) ,deleted devourer 5 marked as D5 and the storages marked D5HI,D5CD. Remove storages first to see if you need to delete the devourer responsible for it.
• An extension is added,which connects to only dirt and rock bus....the placement for the loose storage shift by few tiles for each sorter added...so you will have to place and connect them...there is a out of place flat lift in this blueprint(as a reminder).....use it to connect belt "i" to the second input to the storage.
• Fifth sorter can get blocked sometimes if there is too much of dirt or rocks fed into 3 or more sorters. But it will be cleared pretty quickly.
• ⚠Mining tower not included.
• Use the E and J outputs for edge cases where an additional product is suddenly found in the digged up mix. For example ,say you are mining copper and iron along the cost line and there is sand mixed with it. Connect a belt from E or J (Wouldn't suggest connecting both for futureproofing) to the input of sand storage.

This is my first blueprint upload,so your feedbacks/suggestions are appreciated.