FBR STATION POWER & FLUIDS

Author

Fabien2prem

Downloads

235

Votes Score

50%

Votes

Favorited

Updated

11/13/25

Created

11/13/25

Description

FBR Station with power, Water, Brine, Oxygen, Hydrogen Production (U3 - endgame - no pollution)

/!\ This blueprint is an iteration of Calen's FBR MEGA STATION. He did most of the job here.

FBR Station for electricity and water, hydrogen, brine, oxygen... All maxed out and well optimized. All the reactors need to be filled with core fuel first, and primed with water, to give time for water production to take over. You need to connect also the seawater input and water/brine excess output as shown in the pictures. Then everything works fine.

Input : Salt, Coal, Rock, Steel, Limestone, Sand, Sulfur, Uranium ore powder

Output : Power (720 Mw), Hydrogen, Water, Brine, Oxygen

V1.0

Note : I used the COI Extended mod as a sandbox mode to make this BP. This may be problematic for your import.

See my others BP for more

Have fun

Comments (4)

Tntdruid

Where do i input the water?

Fabien2prem (edited)

Hello, best place is on the main balancer which is on the side of the plant, roughly middle, opposite side of the 9 cooling towers. There is 1 input left usable, for water inlet. Connect a Tier 4 pipe of water, wait until overflow, start first the 3 closest reactors, wait for water production to be stable, then you can disconnect the pipe and start the 2 last reactors

stephenlong202

may i ask what did you change? it looks the same as the current one he published.

Fabien2prem

Well the overall operation and goal of the plant is the same, but if you look closely you'll notice that there are big changes regarding inputs and outputs and plant organization. I made it fit my needs, in terms of footprint size, no pollution requirement, need for oxygen and available input materials.