First train line

This guide shows how to set up a train line to move cargo between two points. The next tutorial will expand on this by adding multiple trains to scale-up your train network.

Build loading and unloading stations

Open <b>{0}</b> → <b>{1}</b> and place a <b>train station module</b> at the loading site. Pick the module that matches the product you want to move, for example <b>{2}</b> for bulk materials.

Build a <b>{0}</b> adjacent to the module. Click the loading module, assign it a product, and set its mode to <b>{1}</b>.

Do the same at the unloading site: Build module and station, assign product to the module (1), and set it to <b>{0}</b> mode (2). A small arrow on each module shows the products flow direction.

Attach a <b>fuel-station module</b> (diesel or steam) to either station so the locomotive tops up while it is at the station. Don’t forget to connect the module to a fuel storage.

Rename the {0} to a name you will recognize later, like “coal loading”. The name will appear later in the train schedule.

Build train tracks and depot

Select the <b>{0}</b> tool and build one continuous track between the two stations. If terrain is in the way, use the elevation tools (see the toolbox at the bottom-right).

Extend the track past each station by at least twice the station’s length. The extra space lets the locomotive clear the module to align wagons to the module.

Build a <b>{0}</b> and connect its entrance and exit to your line.

Train tracks in Captain of Industry are directional. Select the <b>{0}</b> tool, ensure that all tracks are bi-directional, except the ones coming into the depot, which should match the depot's direction.

Set up a train line

Open the <b>{0}</b>, create a new line (1), and add the two stations (2).

For optimal operation, set the departure rule at the loading station to <b>wait until full</b> (3) and at the unloading station to <b>wait until empty</b> (4).

Build the train

Click the <b>{0}</b> and press <b>{1}</b>.

Add two cargo wagons that match your station module types (2).

<b>Select the line</b> you just created (3) and hit <b>{0}</b> (4).

All set

Deliver the construction materials, finish all buildings and track segments, and watch the locomotive roll out. You now have an end-to-end cargo run.

Notice that even one module can load and unload a train with multiple wagons, if there is enough extra space beyond the station end.

The next tutorial shows how to let several trains share the same line without signals or traffic jams.