This guide shows how to set up a train line to move cargo between two points. The next tutorial will expand on this by adding multiple trains to scale-up your train network.
trains tutorial
June 2, 2025
이 가이드는 화물을 두 지점 간에 운송하기 위한 열차 노선 설정 방법을 설명합니다. 다음 튜토리얼에서는 여러 대의 열차를 추가하여 기차 네트워크를 확장하는 방법을 다룹니다.
Sign in to submit translations and participate in voting
Open <b>{0}</b> → <b>{1}</b> and place a <b>train station module</b> at the loading site. Pick the module that matches the product you want to move, for example <b>{2}</b> for bulk materials.
<b>{0}</b> → <b>{1}</b>를 열고 상차 지점에 <b>기차역 모듈</b>을 설치하세요. 이동하려는 제품에 맞는 모듈을 선택하세요. 예를 들어 벌크 자재용으로는 <b>{2}</b>를 선택하세요.
Do the same at the unloading site: Build module and station, assign product to the module (1), and set it to <b>{0}</b> mode (2). A small arrow on each module shows the products flow direction.
하차 지점에서도 동일하게 수행하세요: 모듈과 역을 건설하고, 모듈에 제품을 할당한 후(1) 모드를 <b>{0}</b>(2)로 설정하세요. 각 모듈의 작은 화살표는 제품 흐름 방향을 보여줍니다.
Attach a <b>fuel-station module</b> (diesel or steam) to either station so the locomotive tops up while it is at the station. Don’t forget to connect the module to a fuel storage.
두 역 중 하나에 <b>연료 공급 모듈</b>(디젤 또는 증기)을 설치하여 기관차가 역에 머무르는 동안 연료를 보충하도록 하세요. 모듈을 연료 저장고에 연결하는 것도 잊지 마세요.
Select the <b>{0}</b> tool and build one continuous track between the two stations. If terrain is in the way, use the elevation tools (see the toolbox at the bottom-right).
<b>{0}</b> 도구를 선택한 후 두 역 사이에 연속된 선로를 건설하세요. 지형이 방해된다면 오른쪽 하단 도구 상자에 있는 고도 조정 도구를 사용하세요.
Extend the track past each station by at least twice the station’s length. The extra space lets the locomotive clear the module to align wagons to the module.
각 역에서 선로를 역 길이의 최소 두 배만큼 연장하세요. 여유 공간을 확보하면 기관차가 모듈을 벗어나 화차를 모듈에 맞춰 정렬할 수 있습니다.
Train tracks in Captain of Industry are directional. Select the <b>{0}</b> tool, ensure that all tracks are bi-directional, except the ones coming into the depot, which should match the depot's direction.
Captain of Industry에서 선로는 방향성이 있습니다. <b>{0}</b> 도구를 선택한 후, 모든 선로가 양방향이 되도록 하고 차고로 들어오는 선로만 차고의 방향과 일치하도록 설정하세요.
For optimal operation, set the departure rule at the loading station to <b>wait until full</b> (3) and at the unloading station to <b>wait until empty</b> (4).